Historically, national requirements for bus and coach type approval have been subject to the systems in place within each European Member State. However, Directive 2007/46/EC, as amended, introduced the basis of a European wide certification scheme for this category of vehicle. The key application dates were:
Type approval is the confirmation that production samples of a design will meet specified performance standards. The specification of the product is recorded and only that specification is approved.
Automotive EC Directives and UN Regulations (formerly known as UNECE Regulations) require third party approval - testing, certification and production conformity assessment by an independent body. Each Member State is required to appoint an Approval Authority to issue the approvals and a Technical Service to carry out the testing to the Directives and Regulations. An approval issued by one Authority will be accepted in all the Member States.
VCA is the designated UK Approval Authority and a Technical Service for all type approvals to automotive EC Directives and most UN Regulations.
Routes to certification
Until the relevant application date for your particular vehicle category (outlined above), existing national arrangements will be in place. However, once the relevant application date applies, the following routes to certification will be available to you:
EC Whole Vehicle Type Approval (ECWVTA) is based around EC Directives and provides for the approval of whole vehicles, in addition to vehicle systems and separate components. This certification is accepted throughout the EU without the need for further testing until a standard is updated or your design changes.
Information on Low Volume/Small Series Manufacturers
Full EC whole vehicle type approval (ECWVTA) won't suit everyone, particularly those manufacturing vehicles in low numbers. In recognition of this fact there are a number of other approval routes available, including:
(National Small Series Type Approval) is a UK national scheme for low volume manufacturers who intend to sell only in the UK. The advantages of NSSTA are relaxed technical requirements for some subjects, a more pragmatic approach to the Conformity of Production (CoP) requirements, and reduction in administrative requirements. Like ECWVTA, once the design is approved, individual vehicles do not need to be tested.
Individual Vehicle Approval is a UK national scheme and the most likely route for those manufacturing or importing single vehicles or very small numbers. IVA does not require CoP as it us based on inspection of each vehicle, although most bodybuilders and converters will work with manufacturers to ensure there is no warranty compromise.
Under IVA, vehicles have to be inspected by the Driver & Vehicle Standards Agency (DVSA) in Great Britain or the Driver and Vehicle Agency (DVA) in Northern Ireland.
* Customers in North America should contact us here to make an application, or for further information: email@example.com
To view an Adobe Acrobat files (prefixed with this symbol , you will need to have Acrobat software installed on your machine. Follow this link for more information on this, and to find out how to get the latest version of the free Adobe Acrobat reader
|Last Updated: Thursday 19th September 2019 | Crown Copyright | Disclaimer | How to link to this website | Privacy and Cookies|