Flexibility Applications for NRMM and Tractors

This page was last updated on 5th March 2020

EU Regulation 2016/1628

EU Regulation 2016/1628: Requirements relating to gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile machinery entered into force on 6th October 2016 and is applicable from 1st January 2017.

Link to 2016/1628 on EUR-Lex

NRMM Prototype Engine Applications

Engines that have not been EU type-approved in accordance with Regulation (EU) 2016/1628 shall be authorised, in accordance with Article 34(4) of that Regulation, to be temporarily placed on the market for the purposes of field testing if they comply with the detailed technical specifications and conditions laid down in Annex XI to the Regulation.

Before placing the engine on the market in the UK, the manufacturer must inform the VCA by completing the application form and an engine details list below. Once completed, please email your application and engine list to law@vca.gov.uk

Prototype Engines Application 

Flexibility Applications

Under EC Directives 97/68 (Non-Road Mobile Machinery NRMM) and 2000/25 (Tractors), Original Equipment Manufacturers may on change of emissions standards apply for Flexibility to continue to fit a limited number of engines complying to an earlier standard to their Non-Road Mobile Machinery or Tractors. To apply please complete the application form below:

Application form – Flexibility NRMM and Tractor Provisions

The guidance document below may help with any questions about the flexibility scheme for NRMM and Tractors.

VCA’s NRMM and Tractor Flexibilities Guide

Sell-Off Provisions

Directive 97/68/EC has a provision in Section 4 Article 9, commonly referred to as “Sell-Off”, which allows engine manufacturers a period of two years after the start of a new emission standard, during which the manufacturer can place engines complying with the earlier standard, onto the EU market.

Further Guidance

The Committee for European Construction Equipment (CECE), has published useful guidance documents in their website: Guidelines published by CECE.

For Non-Road Mobile Machinery: A useful source of information in respect of changes to 2016/1628

For Tractors: CEMAs Transitional Provisions & Exemptions for Agricultural and Forestry Tractors

Please note that VCA has no control over the content or accuracy of other websites, nor should endorsement by VCA of any third-party web-sites – listed here or elsewhere be inferred.

Locomotive Flexibility

For an application form or more information, please contact us on: law@vca.gov.uk